Do you need thicker or larger-area jobs? Contact us.

Burr is a height or protruding edge or residual parts of the material that remain on the surface, edges or certain parts of the parts after the production process, after the production process of the parts produced by machines such as presses or CNC that process metal plates or metal blocks.
It is necessary to clean it in order not to disturb it both for the next processes and during use. All burrs are removed with a process called 'deburring' and different types of machines.

Galvanization is the coating of the metal with "Zinc" against corrosion. Galvanized coating is done in 2 ways. The first is Electro Galvanized coating, the second is Hot Dip Galvanized coating. With the hot-dip galvanizing method, the coating is done by dipping the material into the molten zinc (460C°). In this way, oxidation is prevented and the life of the metals is extended and the air contact is prevented from rusting. Oxygen interacts with the metal, causing abrasions (rust) and the layered parts are separated from the metal, the strength of the metal decreases, and the image becomes dirty. Rusting is not only a visual defect, but also a chemical reaction that corrodes metal. In the coating with galvanization, a population is formed on the metal, this population penetrates into every corner, inside, surface and cavities of the metal. It is applied to galvanized, iron or steel. Wear resistance is increased by coating the metal with zinc. The best way to prevent rust is coating application. The coating thickness decreases and loses every year, that is, zinc disappears in certain amounts every year, which allows the life to be determined beforehand. Since zinc is more reactive than iron or steel, first the zinc galvanized coating corrodes, protecting the iron or steel in the substrate.