Alloys:

St37-2 ( 1.0037 ) S235JR Hot rolled steels

St44-2 ( 1.0044 ) S275JR Hot rolled steels

St52-3 ( 1.0570 ) S355J0 Hot rolled steels

DC01  ( 1.0330 ) Cold rolled steel

DC03  ( 1.0347 ) Cold rolled steel

DC04  ( 1.0338 ) Cold rolled steel

DC05  ( 1.0312 ) Cold rolled steel

Description: 

Carbon steel properties vary according to the amount of carbon in them. As the carbon content increases, the hardness, tensile and yield properties of steels increase. In addition, as the amount of carbon increases, properties such as ductility and impact resistance decrease.

In cases where the amount of carbon increases, the plastic forming properties of steels also decrease. Apart from this, the steels are heated and quenched with martensitic transformation and the steels are hardened. As the amount of carbon in the steel increases, the steel loses its weldability and water absorption ability.

Alloys:

Standard Cr-Ni Stainless Steels (Austenitic)

304 / 1.4301,

304L /1.4307,

321 / 1.4541

Standard Cr-Ni Mo Stainless Steels (Austenitic)

316 / 1.4401,

316L /1.4404,

316Ti /1.4571

Heat Resistant Stainless Steels (Austenitic)

310S / 1.4845

Ferritic Stainless Steels

430 / 1.4016

Duplex Stainless Steels

LDX 2101/ 1.4162, 2304 / 1.4362, 2205 / 1.4462

Description:

When compared with other steels, stainless steels are preferred because of their excellent corrosion resistance, their availability at different mechanical properties, their ability to be used at low and high temperatures, their longevity, easy shaping, aesthetic appearance, effortless cleaning, therefore being hygienic, recyclable and environmentally friendly.

JIS-G3302 Galvanized Cold Rolled SGCC Steels

Description:

Galvanized sheet is coated with zinc so that metal materials do not rust. These products can be both cold rolled and hot rolled as low carbon. In order to prevent corrosion, the sheets undergo a process called hot dipping at the end of these processes. Thus, galvanized sheet production is made with the zinc coating process and it is ready for use.

AL2024 T3

AL6061 T6

AL6063 T6

AL5052 H32

AL7075 T6

It is a soft and light metal.
Matte silvery colour.
Its density is about one third that of steel or copper.
It can be easily forged, machined and cast.
It has very superior corrosion properties.

Cu-DHP, CW024A, 2.0090, EN 1652

Copper Content CU min 99.9% – P 0.004-0.040%

Dimensions Width 500-1000mm

Length 500-2000mm

Thickness 0.30-15mm

Description: 

Copper shows very high electrical and thermal conductivity.
The combination of this feature with its easy formability and resistance to corrosion makes it a very important industrial material.
High purity copper has very high ductility.
It has a high hot forming ability.
Copper is a high strength material at subzero temperatures.
Heat treatments such as recrystallization can change these mechanical properties

CuZn37 / CW508 L , CuZn30 / CW505 L

Thickness : Between 0.05 mm and 20 mm

Plate Size: 660x2000 mm, 1000x2000 mm, 1000x3000 mm

Roll size: 6 mm to 350 mm wide

CuSn6 / G.CuSn6 / SnBz6 /CuSn8 /G.CuSn8 / SnBz8

Roll size: 1 mm to 60mm wide

It is a high elongation material resistant to sea water and corrosion.
Gears operating under heavy load and low speed bearings and bushings, pumps and turbine propellers and requiring high strength.
It is a material that is needed and consumed in many fields such as electronics, advertising and automotive industry.